کوشا فایل

کوشا فایل بانک فایل ایران ، دانلود فایل و پروژه

کوشا فایل

کوشا فایل بانک فایل ایران ، دانلود فایل و پروژه

مقاله IQ Test

اختصاصی از کوشا فایل مقاله IQ Test دانلود با لینک مستقیم و پر سرعت .

مقاله IQ Test


مقاله IQ Test

لینک پرداخت و دانلود در "پایین مطلب"

 فرمت فایل: word (قابل ویرایش و آماده پرینت)

 تعداد صفحات:9

Originally, IQ, or Intelligence Quotient, was used to detect persons of lower intelligence, and to detect children of lower intelligence in order to place them in special education programs. The first IQ tests were designed to compare a child's intelligence to what his or her intelligence "should be" as compared to the child's age. If the child was significantly "smarter" than a "normal" child of his or her age, the child was given a higher score, and if the child scored lower than expected for a child of his or her age, the child was given a lower IQ score.

Today IQ testing is used not primarily for children, but for adults. Today we attempt to write tests that will determine an adult's true mental potential, unbiased by culture, and compare scores to the scores of other adults who have taken the same test. So today we compare an adult's objective results to the objective results of other adults, and determine how intelligent each test taker is compared to all other test takers, instead of comparing test takers to an arbitrary age related standard.

Standard Deviation:

The first step to understanding IQ testing is to understand standard deviation.

Standard deviation is kind of the "avg of the avg," and often can help you find the story behind the data. To understand this concept, it can help to learn about what statisticians call normal distribution of data.

A normal distribution of data means that most of the examples in a set of data are close to the "average," while relatively few examples tend to one extreme or the other.

Let's say you are writing a story about nutrition. You need to look at people's typical daily calorie consumption. Like most data, the numbers for people's typical consumption probably will turn out to be normally distributed. That is, for most people, their consumption will be close to the mean, while fewer people eat a lot more or a lot less than the mean.

When you think about it, that's just common sense. Not that many people are getting by on a single serving of kelp and rice. Or on eight meals of steak and milkshakes. Most people lie somewhere in between.

If you looked at normally distributed data on a graph, it would look something like this:


دانلود با لینک مستقیم


مقاله IQ Test

ANSI/ASHRAE Standard 110-2016

اختصاصی از کوشا فایل ANSI/ASHRAE Standard 110-2016 دانلود با لینک مستقیم و پر سرعت .

ANSI/ASHRAE Standard 110-2016


ANSI/ASHRAE Standard 110-2016

36 صفحه pdf

ANSI/ASHRAE Standard 110-2016

Methods of Testing Performance of Laboratory Fume Hoods


دانلود با لینک مستقیم


ANSI/ASHRAE Standard 110-2016

تحقیق در مورد Test IQ.

اختصاصی از کوشا فایل تحقیق در مورد Test IQ. دانلود با لینک مستقیم و پر سرعت .

تحقیق درباه Test IQ.
با فرمت word
قابل ویرایش و پرینت

تعداد صفحات : 9
فرمت : doc





موضوع مقاله:

IQ










What is an IQ Score?
Originally, IQ, or Intelligence Quotient, was used to detect persons of lower intelligence, and to detect children of lower intelligence in order to place them in special education programs. The first IQ tests were designed to compare a child's intelligence to what his or her intelligence "should be" as compared to the child's age. If the child was significantly "smarter" than a "normal" child of his or her age, the child was given a higher score, and if the child scored lower than expected for a child of his or her age, the child was given a lower IQ score.
Today IQ testing is used not primarily for children, but for adults. Today we attempt to write tests that will determine an adult's true mental potential, unbiased by culture, and compare scores to the scores of other adults who have taken the same test. So today we compare an adult's objective results to the objective results of other adults, and determine how intelligent each test taker is compared to all other test takers, instead of comparing test takers to an arbitrary age related standard.
Standard Deviation:
The first step to understanding IQ testing is to understand standard deviation.
Standard deviation is kind of the "avg of the avg," and often can help you find the story behind the data. To understand this concept, it can help to learn about what statisticians call normal distribution of data.
A normal distribution of data means that most of the examples in a set of data are close to the "average," while relatively few examples tend to one extreme or the other.
Let's say you are writing a story about nutrition. You need to look at people's typical daily calorie consumption. Like most data, the numbers for people's typical consumption probably will turn out to be normally distributed. That is, for most people, their consumption will be close to the mean, while fewer people eat a lot more or a lot less than the mean.
When you think about it, that's just common sense. Not that many people are getting by on a single serving of kelp and rice. Or on eight meals of steak and milkshakes. Most people lie somewhere in between.
If you looked at normally distributed data on a graph, it would look something like this:

The x-axis (the horizontal one) is the value in question... calories consumed, dollars earned or crimes committed, for example. And the y-axis (the vertical one) is the number of datapoints for each value on the x-axis... in other words, the number of people who eat x calories, the number of households that earn x dollars, or the number of cities with x crimes committed.
Now, not all sets of data will have graphs that look this perfect. Some will have relatively flat curves, others will be pretty steep. Sometimes the mean will lean a little bit to one side or the other. But all normally distributed data will have something like this same "bell curve" shape.
The standard deviation is a statistic that tells you how tightly all the various examples are clustered around the mean in a set of data. When the examples are pretty tightly bunched together and the bell-shaped curve is steep, the standard deviation is small. When the examples are spread apart and the bell curve is relatively flat, that tells you you have a relatively large standard deviation.
Computing the value of a standard deviation is complicated. But let me show you graphically what a standard deviation represents...
(Niles Online)
One standard deviation away from the mean in either direction on the horizontal axis (the red area on the above graph) accounts for somewhere around 68 percent of the people in this group. Two standard deviations away from the mean (the red and green areas) account for roughly 95 percent of the people. And three standard deviations (the red, green and blue areas) account for about 99 image

لینک دانلود Test IQ. پایین


دانلود با لینک مستقیم


تحقیق در مورد Test IQ.

پروژه رشته مکانیک پیرامون Power Test

اختصاصی از کوشا فایل پروژه رشته مکانیک پیرامون Power Test دانلود با لینک مستقیم و پرسرعت .

پروژه رشته مکانیک پیرامون Power Test


 پروژه رشته مکانیک پیرامون Power Test

 

 

 

 

 

 

 

 

 



فرمت:word(قابل ویرایش)

تعداد صفحات:22

چکیده:


Power Test

هدف از انجام این تست‌ها و آزمایشات عبارت است از :

الف ) ایجاد یک استاندارد ارزش یابی (آدیت) موتورها برای بررسی کیفی (میزان توان- گشتاور مصرف ویژه سوخت و سایر پارامترهای تعریف شده).

ب ) ایجاد روش مشخص برای شناسایی و کشف ایرادات موجود در موتورها (مخصوصاً ایرادات مهم) کلیه موتورهای تولیدی و مورد استفاده سطح ایران خودرو را می‌توان برای انجام این تست مورد استفاده قرار داد.

قبل از انجام تست Performance باید یک سری آزمایشات و تست های دیگر بر روی موتور انجام شود.

این مراحل به شکل زیر است:

1) آدیت موتورها : ارزش‌یابی و بازبینی دوره‌ای از موتورها، در حقیقت انتخاب از بین موتورهای تولیدی و تأئید شده می‌باشد. پس از آزمون عملکرد جهت شناسایی میزان انطباق با تعاریف و مشخصات فنی موتور و کشف معایب احتمالی آن از جمله معایب قطعه – مونتاژ موتور – تست نهایی و اشکالات اپراتور می‌باشد.

2) HOT Test :

کنترل کلی موتورها البته در حالت روشن که پس از مونتاژ موتور در انتهای خط تولید صورت می‌گیرد ( موتور باید بدون بار باشد)

در این تست ابتدا مدارهای آب، سوخت ، برق وگازهای خروجی از موتور را وصل می‌کنیم.

پس سطح روغن تزریقی به موتور را چک می‌کنیم وهواگیری از مدار آب را انجام می‌دهیم و اتصالات سوخت رسانی را برای جلوگیری از نشتی بنزین بررسی می‌کنیم.

موتور را روشن کرده و به دور 1750 rpm می رسانند. (فشار روغن موتور نباید در این حالت از 2.5 bar بیشتر شود) . برای مدتی که موتور در دور 1750 rpm کار می‌کند شرایطش پایدار می گردد.

سپس دور موتور را به 2500 rpm می‌رسانیم. در این حالت میزان فشار روغن و دمای روغن را بدست بیاوریم. هم چنین از طریق کامپیوتر می‌توانیم دمای آب ورودی به موتور و دمای آب خروجی از رادیاتور را نیز اندازه بگیریم. در HOT Test علاوه بر این موارد باید صدای غیرعادی موتورها اعم از knock و ارتعاشات اضافی ونویزها و هم چنین حرکت منظم موتور را مورد بررسی قرار می‌دهیم. سپس اتصالات مربوط به سیستم روغن موتور اعم از اتصال لوله روغن بر روی بلوک سیلندر-اتصال لوله گیج – اتصال فیلتر روغن – اتصال پیچ تخلیه روغن – اتصال کاسه نمد میل سوپاپ و اتصال کاسه نمد انتهای میل لنگ چک می‌شود.

هیچ گونه روغنی نباید در منیفولد هوا و اگزوز مشخص شود. هر گونه نشتی احتمالی روغن را در چهار طرف موتور بررسی می‌کنیم. حال نوبت به اتصالات مدار آب موتور است که شامل بررسی لوله های آب اتصال لوله آب به بلوک سیلندر و سرسیلندر اتصال سه راهی آب – اتصال لوله هواگیری آب – اتصال مربوط به واحد ارسال کننده دمای آب و نسور دمای آب است و دسته آخر هم باید اتصالات مربوط به سیستم سوخت رسانی که خیلی مهم است را چک کنیم.

مرحله بعدی

3) Running in

این تست که در حقیقت تست آبندی موتور است و قبل از تست Performance انجام می‌شود. این تست دارای مراحل زیر است که نشان داده شده است.

در ابتدا موتور در حالت بدون بار (یعنی دریچه تراتل کاملاً بسته ) در دور 1000rpm به مدت 30 دقیقه کار می‌کند .

بعد از این مرحله باید روغن موتور را به طور کامل عوض کنیم.

سپس طبق جدول زیر ادامه می‌دهیم

 


دانلود با لینک مستقیم

دانلود پروژه Power Test

اختصاصی از کوشا فایل دانلود پروژه Power Test دانلود با لینک مستقیم و پرسرعت .

دانلود پروژه Power Test


دانلود پروژه Power Test

Power Test

هدف از انجام این تست‌ها و آزمایشات عبارت است از :

الف ) ایجاد یک استاندارد ارزش یابی (آدیت) موتورها برای بررسی کیفی (میزان توان- گشتاور مصرف ویژه سوخت و سایر پارامترهای تعریف شده).

ب ) ایجاد روش مشخص برای شناسایی و کشف ایرادات موجود در موتورها (مخصوصاً ایرادات مهم) کلیة موتورهای تولیدی و مورد استفاده سطح ایران خودرو را می‌توان برای انجام این تست مورد استفاده قرار داد.

قبل از انجام تست Performance باید یک سری آزمایشات و تست های دیگر بر روی موتور انجام شود.

این مراحل به شکل زیر است:

1) آدیت موتورها : ارزش‌یابی و بازبینی دوره‌ای از موتورها، در حقیقت انتخاب از بین موتورهای تولیدی و تأئید شده می‌باشد. پس از آزمون عملکرد جهت شناسایی میزان انطباق با تعاریف و مشخصات فنی موتور و کشف معایب احتمالی آن از جمله معایب قطعه – مونتاژ موتور – تست نهایی و اشکالات اپراتور می‌باشد.

2) HOT Test :

کنترل کلی موتورها البته در حالت روشن که پس از مونتاژ موتور در انتهای خط تولید صورت می‌گیرد ( موتور باید بدون بار باشد)

در این تست ابتدا مدارهای آب، سوخت ، برق وگازهای خروجی از موتور را وصل می‌کنیم.

پس سطح روغن تزریقی به موتور را چک می‌کنیم وهواگیری از مدار آب را انجام می‌دهیم و اتصالات سوخت رسانی را برای جلوگیری از نشتی بنزین بررسی می‌کنیم.

موتور را روشن کرده و به دور 1750 rpm می رسانند. (فشار روغن موتور نباید در این حالت از 2.5 bar بیشتر شود) . برای مدتی که موتور در دور 1750 rpm کار می‌کند شرایطش پایدار می گردد.

سپس دور موتور را به 2500 rpm می‌رسانیم. در این حالت میزان فشار روغن و دمای روغن را بدست بیاوریم. هم چنین از طریق کامپیوتر می‌توانیم دمای آب ورودی به موتور و دمای آب خروجی از رادیاتور را نیز اندازه بگیریم. در HOT Test علاوه بر این موارد باید صدای غیرعادی موتورها اعم از knock و ارتعاشات اضافی ونویزها و هم چنین حرکت منظم موتور را مورد بررسی قرار می‌دهیم. سپس اتصالات مربوط به سیستم روغن موتور اعم از اتصال لوله روغن بر روی بلوک سیلندر-اتصال لوله گیج – اتصال فیلتر روغن – اتصال پیچ تخلیه روغن – اتصال کاسه نمد میل سوپاپ و اتصال کاسه نمد انتهای میل لنگ چک می‌شود.

هیچ گونه روغنی نباید در منیفولد هوا و اگزوز مشخص شود. هر گونه نشتی احتمالی روغن را در چهار طرف موتور بررسی می‌کنیم. حال نوبت به اتصالات مدار آب موتور است که شامل بررسی لوله های آب اتصال لوله آب به بلوک سیلندر و سرسیلندر اتصال سه راهی آب – اتصال لوله هواگیری آب – اتصال مربوط به واحد ارسال کننده دمای آب و نسور دمای آب است و دسته آخر هم باید اتصالات مربوط به سیستم سوخت رسانی که خیلی مهم است را چک کنیم.

مرحله بعدی

3) Running in

این تست که در حقیقت تست آبندی موتور است و قبل از تست Performance انجام می‌شود. این تست دارای مراحل زیر است که نشان داده شده است.

در ابتدا موتور در حالت بدون بار (یعنی دریچه تراتل کاملاً بسته ) در دور 1000rpm به مدت 30 دقیقه کار می‌کند .

بعد از این مرحله باید روغن موتور را به طور کامل عوض کنیم.


دانلود با لینک مستقیم